多路复用器/多路分解器 开关IC TC7W53F VFSOP8 marking/标记 7W53F
| 电路配置Circuit | 1 x 1:2 |
| 导通电阻On-State Resistance | 80 Ω/Ohm |
| 电源电压Voltage Supply Source | ±2 V ~ 6 V |
| Description & Applications | TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic Single 1-of-2 Demultiplexer with N-channel pull-down MOSFET The TC7PB53TU is a single 1-of-2 high-speed CMOS demultiplexer designed for low-voltage applications. The low ON-resistance of the switch allows the input (COM) to be connected to the outputs (Ch0 and Ch1) while maintaining CMOS low power dissipation. The device uses P-channel MOSFETs for the switch block between the input and output pins. When the control input (A) is Low, the data (High-level) in the COM pin is routed to the Ch0 pin. When the control input (A) is High, the data (High-level) in the COM pin is routed to the Ch1 pin. The unused pin is clamped to ground using an N-channel MOSFET. All inputs are equipped with protection circuits against static discharge. High speed Low power dissipation High noise immunity Low on Resistance High Degree of Linearity |
| 描述与应用 | 东芝CMOS数字集成电路硅单片 单1-2的解复用器与N沟道下拉MOSFET 的TC7PB53TU是一个单一的1-2高感光度CMOS 多路分解器设计用于低电压应用。低 导通电阻的开关允许输入端（COM）是 连接的输出（通道0和通道1），同时保持 CMOS低功耗。该设备采用P沟道 MOSFET的开关块之间的输入和输出引脚。 当控制输入（A）为低，数据（高级别） COM引脚路由的CH0针。当控制输入（A） 高电平时，数据在COM引脚（高电平）被路由到通道1 针。未使用的引脚被钳位到地使用一个N沟道 的MOSFET。 所有输入都配有保护电路防止静电放电。 高速 低功耗 高抗干扰 低导通电阻 高线性度 |
| 规格书PDF |
